Tire Replacement, Rotation and Alignment
Looking for new tires?
Find nearby tire pricing by clicking the "LOCATE A DEALER" button below.
Then click "FIND TIRES" within your selected dealer.
The Certified Service experts can recommend the right tires for your vehicle.
They offer a range of top quality tire brands at competitive prices.
How do you know if you need new tires?
Tire wear depends on several factors, including your driving style and tire maintenance habits. Wrong size load and speed rating can void your warranty. But one sure way to know when to replace your tires is when treadwear indicators appear. A tire’s built-in treadwear indicators are wear bars that look like narrow strips of smooth rubber across the tread and appear when it’s time to replace the tire.
You also need a new tire if:
- You can see three or more treadwear indicators around the tire
- Cord or fabric is showing through the rubber
- The tread or sidewall is cracked, cut or snagged deep enough to show cord or fabric
- The tire has a bulge or split
- The tire has a puncture, cut, or other damage that can't be repaired correctly
tire air pressure
Tire Air Pressure
Maximize your tires’ performance and durability by monitoring and maintaining correct air pressure.
Air is a gas, expanding when heated and contracting when cooled. For most of North America, fall and early winter are especially important times for checking tire pressure – as the ambient temperature falls, tire pressure goes down.
A good rule of thumb is that every 10 degrees Fahrenheit temperature change, tire pressure changes about 1 psi — higher as temperatures rise, lower as they fall. Also, check your vehicle’s owner manual for recommended tire pressure.
Under-inflated tires can cause:
- Premature or irregular wear
- Poor handling
- Reduced fuel economy
Over-inflated tires can cause:
- Unusual wear
- Poor handling
- Reduced fuel economy
Checking Air Pressure
Check your vehicle’s tires at least once a month when the tires are cold (let the vehicle sit for at least 3 hours). Look in your owner manual for the recommended tire inflation for your vehicle. Use a quality gauge. Don’t eyeball tires — radial tires can look fine even when they’re
Be sure to look for objects that have become wedged in the tread — they can work themselves further into the tire and cause air loss.
And don’t forget to check the spare!
tire rotation + alignment
Since each tire performs different tasks (such as steering or front- versus rear-wheel drive), tires wear at different rates. Rotating your tires at recommended intervals extends their useful life and achieves more uniform tire wear.
It’s important to rotate your tires according to the correct tire rotation pattern. Front tires encounter different tasks than the rear tires. And a front-wheel-drive car’s tires perform different tasks than those on a rear-wheel-drive car. Your Owner Manual specifies which rotation pattern is right for your vehicle.
Your vehicle’s front and rear tires may also use different pressures — make sure to adjust individual tire pressure to the recommendation for each wheel position. See your owner manual for recommendations.
Wheel Rust or Dirt
Rust or dirt may not allow proper tightening of the lug nuts and a wheel may loosen over time. When you have your tires rotated, be sure to remove any rust or dirt from places where the wheel attaches to the vehicle and torque the wheel lug nuts to the specification in your owner manual. In an emergency, you can use a cloth or paper towel, but be sure to use a scraper or wire brush later to remove all rust or dirt and torque to specifications.
Also, remember that rotating your tires won’t correct wear problems caused by worn mechanical parts or incorrect inflation pressures.
Wheel Alignment & Tire Balance
Scheduled alignment and balancing are not needed, since your vehicle’s wheels were aligned and balanced at the factory. But if you notice unusual tire wear or that your vehicle pulls one way or the other, the wheel alignment may need to be reset. If you notice your vehicle vibrating on a smooth road, your wheels may be out of balance.
A tire that is out of balance often affects ride quality and can shorten the life of tires, bearings, shocks, and other suspension components. A speed-dependent vibration — becoming noticeable around 45 mph and increasing as speed increases — is probably balance-related.
Alignment is critical for ensuring that you get maximum wear and performance from your tires. Poor alignment results from your car's suspension and steering system becoming out of adjustment with each other. The biggest indicators of your vehicle being out of alignment are pulling one way or the other as you drive or unusual tire wear. Improper tire inflation can also cause unusual tire wear.
Your vehicle may have both front and rear wheel alignment specifications. Your dealer can recommend the alignment type that's right for your vehicle.
Your dealer offers a range of top quality tire brands. They only carry tires that have been specifically designed for GM vehicles. So you can buy a new set of tires just like the ones that were on your GM vehicle the day you first drove it.
fixing a flat tire
What to Do When You Get A Flat
Knowing how to change and repair it can mean the difference between making your appointment and running hours late. And technologies like tires that run even when flat and flatfixers you can store in your trunk make fixing that flat easier than you might think!
If you have any concerns or detailed questions about your vehicle’s tires, contact your dealer.
The Certified Service experts offer these top brands: